View V-10-1A5_8424977.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 v v miniature basic switch miniature basic switch that offers high reliability and security wide variation of best-selling microswitches with switching currents of 10 to 21 a. can be used for interrupting current when doors are opened or closed. available in two types of cases: thermoplastic resin and thermosetting resin. rohs compliant model number legend v- @@ - @@@@ 1. ratings 21: 21 a at 250 vac 16: 16 a at 250 vac 15: 15 a at 250 vac 10: 10 a at 250 vac 2. actuator none : pin plunger 1 : short hinge lever 2 : hinge lever 3 : long hinge lever 4 : simulated roller lever 5 : short hinge roller lever 6 : hinge roller lever 3. contact form 1: spdt 2: spst-nc 3: spst-no 1 2 3456 4. terminals a : solder terminals c2 : quick-connect terminals (#187) c : quick-connect terminals (#250) 5. maximum operating force 6: 3.92 n {400 gf} 5: 1.96 n {200 gf} 4: 0.98 n {100 gf} note: these values are for the pin plunger models. 6. heat resistance none : standard (80c) -t : heat-resistive (150c)
2 v miniature basic switch v list of models ratings 21a 16a actuator terminals contact form maximum operating force (of) pin plunger solder terminals (a) spdt 3.92n --- v-16-1a6 spst-nc --- v-16-2a6 spst-no --- v-16-3a6 spdt 1.96n --- v-16-1a5 spst-nc --- v-16-2a5 spst-no --- v-16-3a5 spdt 0.98n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#187) (c2) spdt 3.92n --- v-16-1c26 spst-nc --- v-16-2c26 spst-no --- v-16-3c26 spdt 1.96n --- v-16-1c25 spst-nc --- v-16-2c25 spst-no --- v-16-3c25 spdt 0.98n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#250) (c) spdt 3.92n v-21-1c6 v-16-1c6 spst-nc v-21-2c6 v-16-2c6 spst-no v-21-3c6 v-16-3c6 spdt 1.96n --- v-16-1c5 spst-nc --- v-16-2c5 spst-no --- v-16-3c5 spdt 0.98n --- --- spst-nc --- --- spst-no --- --- thermoplastic case refer to "micro switch common accessories" for separators (sold separately), actuators (sold separately) and terminal connectors (sold separately).
3 v miniature basic switch v ratings 21a 16a actuator te r m i n a l s contact form maximum operating force (of) short hinge lever solder terminals (a) spdt 3.92n --- v-161-1a6 spst-nc --- v-161-2a6 spst-no --- v-161-3a6 spdt 1.96n --- v-161-1a5 spst-nc --- v-161-2a5 spst-no --- v-161-3a5 spdt 0.98n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#187) (c2) spdt 3.92n --- v-161-1c26 spst-nc --- v-161-2c26 spst-no --- v-161-3c26 spdt 1.96n --- v-161-1c25 spst-nc --- v-161-2c25 spst-no --- v-161-3c25 spdt 0.98n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#250) (c) spdt 3.92n v-211-1c6 v-161-1c6 spst-nc v-211-2c6 v-161-2c6 spst-no v-211-3c6 v-161-3c6 spdt 1.96n --- v-161-1c5 spst-nc --- v-161-2c5 spst-no --- v-161-3c5 spdt 0.98n --- --- spst-nc --- --- spst-no --- --- hinge lever solder terminals (a) spdt 2.45n --- v-162-1a6 spst-nc --- v-162-2a6 spst-no --- v-162-3a6 spdt 1.23n --- v-162-1a5 spst-nc --- v-162-2a5 spst-no --- v-162-3a5 spdt 0.59n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#187) (c2) spdt 2.45n --- v-162-1c26 spst-nc --- v-162-2c26 spst-no --- v-162-3c26 spdt 1.23n --- v-162-1c25 spst-nc --- v-162-2c25 spst-no --- v-162-3c25 spdt 0.59n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#250) (c) spdt 2.45n v-212-1c6 v-162-1c6 spst-nc v-212-2c6 v-162-2c6 spst-no v-212-3c6 v-162-3c6 spdt 1.23n --- v-162-1c5 spst-nc --- v-162-2c5 spst-no --- v-162-3c5 spdt 0.59n --- --- spst-nc --- --- spst-no --- --- refer to "micro switch common accessories" for separators (sold separately), actuators (sold separately) and terminal connectors (sold separately).
4 v miniature basic switch v long hinge lever solder terminals (a) spdt 1.27n --- v-163-1a6 spst-nc --- v-163-2a6 spst-no --- v-163-3a6 spdt 0.69n --- v-163-1a5 spst-nc --- v-163-2a5 spst-no --- v-163-3a5 spdt 0.34n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#187) (c2) spdt 1.27n --- v-163-1c26 spst-nc --- v-163-2c26 spst-no --- v-163-3c26 spdt 0.69n --- v-163-1c25 spst-nc --- v-163-2c25 spst-no --- v-163-3c25 spdt 0.34n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#250) (c) spdt 1.27n v-213-1c6 v-163-1c6 spst-nc v-213-2c6 v-163-2c6 spst-no v-213-3c6 v-163-3c6 spdt 0.69n --- v-163-1c5 spst-nc --- v-163-2c5 spst-no --- v-163-3c5 spdt 0.34n --- --- spst-nc --- --- spst-no --- --- simulated roller lever solder terminals (a) spdt 2.45n --- v-164-1a6 spst-nc --- v-164-2a6 spst-no --- v-164-3a6 spdt 1.23n --- v-164-1a5 spst-nc --- v-164-2a5 spst-no --- v-164-3a5 spdt 0.59n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#187) (c2) spdt 2.45n --- v-164-1c26 spst-nc --- v-164-2c26 spst-no --- v-164-3c26 spdt 1.23n --- v-164-1c25 spst-nc --- v-164-2c25 spst-no --- v-164-3c25 spdt 0.59n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#250) (c) spdt 2.45n v-214-1c6 v-164-1c6 spst-nc v-214-2c6 v-164-2c6 spst-no v-214-3c6 v-164-3c6 spdt 1.23n --- v-164-1c5 spst-nc --- v-164-2c5 spst-no --- v-164-3c5 spdt 0.59n --- --- spst-nc --- --- spst-no --- --- ratings 21a 16a actuator terminals contact form maximum operating force (of) refer to "micro switch common accessories" for separators (sold separately), actuators (sold separately) and terminal connectors (sold separately).
5 v miniature basic switch v short hinge roller lever solder terminals (a) spdt 4.71n --- v-165-1a6 spst-nc --- v-165-2a6 spst-no --- v-165-3a6 spdt 2.35n --- v-165-1a5 spst-nc --- v-165-2a5 spst-no --- v-165-3a5 spdt 1.18n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#187) (c2) spdt 4.71n --- v-165-1c26 spst-nc --- v-165-2c26 spst-no --- v-165-3c26 spdt 2.35n --- v-165-1c25 spst-nc --- v-165-2c25 spst-no --- v-165-3c25 spdt 1.18n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#250) (c) spdt 4.71n v-215-1c6 v-165-1c6 spst-nc v-215-2c6 v-165-2c6 spst-no v-215-3c6 v-165-3c6 spdt 2.35n --- v-165-1c5 spst-nc --- v-165-2c5 spst-no --- v-165-3c5 spdt 1.18n --- --- spst-nc --- --- spst-no --- --- hinge roller lever solder terminals (a) spdt 2.45n --- v-166-1a6 spst-nc --- v-166-2a6 spst-no --- v-166-3a6 spdt 1.23n --- v-166-1a5 spst-nc --- v-166-2a5 spst-no --- v-166-3a5 spdt 0.59n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#187) (c2) spdt 2.45n --- v-166-1c26 spst-nc --- v-166-2c26 spst-no --- v-166-3c26 spdt 1.23n --- v-166-1c25 spst-nc --- v-166-2c25 spst-no --- v-166-3c25 spdt 0.59n --- --- spst-nc --- --- spst-no --- --- quick-connect terminals (#250) (c) spdt 2.45n v-216-1c6 v-166-1c6 spst-nc v-216-2c6 v-166-2c6 spst-no v-216-3c6 v-166-3c6 spdt 1.23n --- v-166-1c5 spst-nc --- v-166-2c5 spst-no --- v-166-3c5 spdt 0.59n --- spst-nc --- spst-no --- ratings 21a 16a actuator te r m i n a l s contact form maximum operating force (of) refer to "micro switch common accessories" for separators (sold separately), actuators (sold separately) and terminal connectors (sold separately).
6 v miniature basic switch v ratings 15a 10a heat-resistive actuator terminals contact form maximum operating force (of) 15a 10a pin plunger solder terminals (a) spdt 3.92n v-15-1a6 --- v-15-1a6-t --- spst-nc v-15-2a6 --- --- --- spst-no v-15-3a6 --- --- --- spdt 1.96n v-15-1a5 V-10-1A5 v-15-1a5-t V-10-1A5-t spst-nc v-15-2a5 v-10-2a5 --- --- spst-no v-15-3a5 v-10-3a5 --- --- spdt 0.98n --- v-10-1a4 --- v-10-1a4-t spst-nc --- v-10-2a4 --- v-10-2a4-t spst-no --- v-10-3a4 --- v-10-3a4-t quick-connect terminals (#187) (c2) spdt 3.92n v-15-1c26 --- v-15-1c26-t --- spst-nc v-15-2c26 --- --- --- spst-no v-15-3c26 --- --- --- spdt 1.96n v-15-1c25 v-10-1c25 v-15-1c25-t v-10-1c25-t spst-nc v-15-2c25 v-10-2c25 --- --- spst-no v-15-3c25 v-10-3c25 --- --- spdt 0.98n --- v-10-1c24 --- v-10-1c24-t spst-nc --- v-10-2c24 --- --- spst-no --- v-10-3c24 --- --- quick-connect terminals (#250) (c) spdt 3.92n v-15-1c6 --- v-15-1c6-t --- spst-nc v-15-2c6 --- --- --- spst-no v-15-3c6 --- --- --- spdt 1.96n v-15-1c5 v-10-1c5 v-15-1c5-t v-10-1c5-t spst-nc v-15-2c5 v-10-2c5 --- --- spst-no v-15-3c5 v-10-3c5 --- --- spdt 0.98n --- v-10-1c4 --- v-10-1c4-t spst-nc --- v-10-2c4 --- --- spst-no --- v-10-3c4 --- --- short hinge lever solder terminals (a) spdt 3.92n v-151-1a6 --- v-151-1a6-t --- spst-nc v-151-2a6 --- --- --- spst-no v-151-3a6 --- --- --- spdt 1.96n v-151-1a5 v-101-1a5 v-151-1a5-t v-101-1a5-t spst-nc v-151-2a5 v-101-2a5 --- --- spst-no v-151-3a5 v-101-3a5 --- --- spdt 0.98n --- v-101-1a4 --- v-101-1a4-t spst-nc --- v-101-2a4 --- --- spst-no --- v-101-3a4 --- --- quick-connect terminals (#187) (c2) spdt 3.92n v-151-1c26 --- v-151-1c26-t --- spst-nc v-151-2c26 --- --- --- spst-no v-151-3c26 --- --- --- spdt 1.96n v-151-1c25 v-101-1c25 v-151-1c25-t v-101-1c25-t spst-nc v-151-2c25 v-101-2c25 --- --- spst-no v-151-3c25 v-101-3c25 --- --- spdt 0.98n --- v-101-1c24 --- v-101-1c24-t spst-nc --- v-101-2c24 --- --- spst-no --- v-101-3c24 --- --- quick-connect terminals (#250) (c) spdt 3.92n v-151-1c6 --- v-151-1c6-t --- spst-nc v-151-2c6 --- --- --- spst-no v-151-3c6 --- --- --- spdt 1.96n v-151-1c5 v-101-1c5 v-151-1c5-t v-101-1c5-t spst-nc v-151-2c5 v-101-2c5 --- --- spst-no v-151-3c5 v-101-3c5 --- --- spdt 0.98n --- v-101-1c4 --- v-101-1c4-t spst-nc --- v-101-2c4 --- --- spst-no --- v-101-3c4 --- --- thermosetting case refer to "micro switch common accessories" for separators (sold separately), actuators (sold separately) and terminal connectors (sold separately).
7 v miniature basic switch v hinge lever solder terminals (a) spdt 2.45n v-152-1a6 --- v-152-1a6-t --- spst-nc v-152-2a6 --- --- --- spst-no v-152-3a6 --- --- --- spdt 1.23n v-152-1a5 v-102-1a5 v-152-1a5-t v-102-1a5-t spst-nc v-152-2a5 v-102-2a5 --- --- spst-no v-152-3a5 v-102-3a5 --- --- spdt 0.59n --- v-102-1a4 --- v-102-1a4-t spst-nc --- v-102-2a4 --- --- spst-no --- v-102-3a4 --- --- quick-connect terminals (#187) (c2) spdt 2.45n v-152-1c26 --- v-152-1c26-t --- spst-nc v-152-2c26 --- --- --- spst-no v-152-3c26 --- --- --- spdt 1.23n v-152-1c25 v-102-1c25 v-152-1c25-t v-102-1c25-t spst-nc v-152-2c25 v-102-2c25 --- --- spst-no v-152-3c25 v-102-3c25 --- --- spdt 0.59n --- v-102-1c24 --- v-102-1c24-t spst-nc --- v-102-2c24 --- --- spst-no --- v-102-3c24 --- --- quick-connect terminals (#250) (c) spdt 2.45n v-152-1c6 --- v-152-1c6-t --- spst-nc v-152-2c6 --- --- --- spst-no v-152-3c6 --- --- --- spdt 1.23n v-152-1c5 v-102-1c5 v-152-1c5-t v-102-1c5-t spst-nc v-152-2c5 v-102-2c5 --- --- spst-no v-152-3c5 v-102-3c5 --- --- spdt 0.59n --- v-102-1c4 --- v-102-1c4-t spst-nc --- v-102-2c4 --- --- spst-no --- v-102-3c4 --- --- long hinge lever solder terminals (a) spdt 1.27n v-153-1a6 --- v-153-1a6-t --- spst-nc v-153-2a6 --- --- --- spst-no v-153-3a6 --- --- --- spdt 0.69n v-153-1a5 v-103-1a5 v-153-1a5-t v-103-1a5-t spst-nc v-153-2a5 v-103-2a5 --- --- spst-no v-153-3a5 v-103-3a5 --- --- spdt 0.34n --- v-103-1a4 --- v-103-1a4-t spst-nc --- v-103-2a4 --- --- spst-no --- v-103-3a4 --- --- quick-connect terminals (#187) (c2) spdt 1.27n v-153-1c26 --- v-153-1c26-t --- spst-nc v-153-2c26 --- --- --- spst-no v-153-3c26 --- --- --- spdt 0.69n v-153-1c25 v-103-1c25 v-153-1c25-t v-103-1c25-t spst-nc v-153-2c25 v-103-2c25 --- --- spst-no v-153-3c25 v-103-3c25 --- --- spdt 0.34n --- v-103-1c24 --- v-103-1c24-t spst-nc --- v-103-2c24 --- --- spst-no --- v-103-3c24 --- --- quick-connect terminals (#250) (c) spdt 1.27n v-153-1c6 --- v-153-1c6-t --- spst-nc v-153-2c6 --- --- --- spst-no v-153-3c6 --- --- --- spdt 0.69n v-153-1c5 v-103-1c5 v-153-1c5-t v-103-1c5-t spst-nc v-153-2c5 v-103-2c5 --- --- spst-no v-153-3c5 v-103-3c5 --- --- spdt 0.34n --- v-103-1c4 --- v-103-1c4-t spst-nc --- v-103-2c4 --- --- spst-no --- v-103-3c4 --- --- ratings 15a 10a heat-resistive actuator te r m i n a l s contact form maximum operating force (of) 15a 10a refer to "micro switch common accessories" for separators (sold separately), actuators (sold separately) and terminal connectors (sold separately).
8 v miniature basic switch v simulated roller lever solder terminals (a) spdt 2.45n v-154-1a6 --- v-154-1a6-t --- spst-nc v-154-2a6 --- --- --- spst-no v-154-3a6 --- --- --- spdt 1.23n v-154-1a5 v-104-1a5 v-154-1a5-t v-104-1a5-t spst-nc v-154-2a5 v-104-2a5 --- --- spst-no v-154-3a5 v-104-3a5 --- --- spdt 0.59n --- v-104-1a4 --- v-104-1a4-t spst-nc --- v-104-2a4 --- --- spst-no --- v-104-3a4 --- --- quick-connect terminals (#187) (c2) spdt 2.45n v-154-1c26 --- v-154-1c26-t --- spst-nc v-154-2c26 --- --- --- spst-no v-154-3c26 --- --- --- spdt 1.23n v-154-1c25 v-104-1c25 v-154-1c25-t v-104-1c25-t spst-nc v-154-2c25 v-104-2c25 --- --- spst-no v-154-3c25 v-104-3c25 --- --- spdt 0.59n --- v-104-1c24 --- v-104-1c24-t spst-nc --- v-104-2c24 --- --- spst-no --- v-104-3c24 --- --- quick-connect terminals (#250) (c) spdt 2.45n v-154-1c6 --- v-154-1c6-t --- spst-nc v-154-2c6 --- --- --- spst-no v-154-3c6 --- --- --- spdt 1.23n v-154-1c5 v-104-1c5 v-154-1c5-t v-104-1c5-t spst-nc v-154-2c5 v-104-2c5 --- --- spst-no v-154-3c5 v-104-3c5 --- --- spdt 0.59n --- v-104-1c4 --- v-104-1c4-t spst-nc --- v-104-2c4 --- --- spst-no --- v-104-3c4 --- --- short hinge roller lever solder terminals (a) spdt 4.71n v-155-1a6 --- v-155-1a6-t --- spst-nc v-155-2a6 --- --- --- spst-no v-155-3a6 --- --- --- spdt 2.35n v-155-1a5 v-105-1a5 v-155-1a5-t v-105-1a5-t spst-nc v-155-2a5 v-105-2a5 --- --- spst-no v-155-3a5 v-105-3a5 --- --- spdt 1.18n --- v-105-1a4 --- v-105-1a4-t spst-nc --- v-105-2a4 --- --- spst-no --- v-105-3a4 --- --- quick-connect terminals (#187) (c2) spdt 4.71n v-155-1c26 --- v-155-1c26-t --- spst-nc v-155-2c26 --- --- --- spst-no v-155-3c26 --- --- --- spdt 2.35n v-155-1c25 v-105-1c25 v-155-1c25-t v-105-1c25-t spst-nc v-155-2c25 v-105-2c25 --- --- spst-no v-155-3c25 v-105-3c25 --- --- spdt 1.18n --- v-105-1c24 --- v-105-1c24-t spst-nc --- v-105-2c24 --- --- spst-no --- v-105-3c24 --- --- quick-connect terminals (#250) (c) spdt 4.71n v-155-1c6 --- v-155-1c6-t --- spst-nc v-155-2c6 --- --- --- spst-no v-155-3c6 --- --- --- spdt 2.35n v-155-1c5 v-105-1c5 v-155-1c5-t v-105-1c5-t spst-nc v-155-2c5 v-105-2c5 --- --- spst-no v-155-3c5 v-105-3c5 --- --- spdt 1.18n --- v-105-1c4 --- v-105-1c4-t spst-nc --- v-105-2c4 --- --- spst-no --- v-105-3c4 --- --- ratings 15a 10a heat-resistive actuator terminals contact form maximum operating force (of) 15a 10a refer to "micro switch common accessories" for separators (sold separately), actuators (sold separately) and terminal connectors (sold separately).
9 v miniature basic switch v contact form ratings 15a 10a heat-resistive actuator te r m i n a l s contact form maximum operating force (of) 15a 10a hinge roller lever solder terminals (a) spdt 2.45n v-156-1a6 --- v-156-1a6-t --- spst-nc v-156-2a6 --- --- --- spst-no v-156-3a6 --- --- --- spdt 1.23n v-156-1a5 v-106-1a5 v-156-1a5-t v-106-1a5-t spst-nc v-156-2a5 v-106-2a5 --- --- spst-no v-156-3a5 v-106-3a5 --- --- spdt 0.59n --- v-106-1a4 --- v-106-1a4-t spst-nc --- v-106-2a4 --- --- spst-no --- v-106-3a4 --- --- quick-connect terminals (#187) (c2) spdt 2.45n v-156-1c26 --- v-156-1c26-t --- spst-nc v-156-2c26 --- --- --- spst-no v-156-3c26 --- --- --- spdt 1.23n v-156-1c25 v-106-1c25 v-156-1c25-t v-106-1c25-t spst-nc v-156-2c25 v-106-2c25 --- --- spst-no v-156-3c25 v-106-3c25 --- --- spdt 0.59n --- v-106-1c24 --- v-106-1c24-t spst-nc --- v-106-2c24 --- --- spst-no --- v-106-3c24 --- --- quick-connect terminals (#250) (c) spdt 2.45n v-156-1c6 --- v-156-1c6-t --- spst-nc v-156-2c6 --- --- --- spst-no v-156-3c6 --- --- --- spdt 1.23n v-156-1c5 v-106-1c5 v-156-1c5-t v-106-1c5-t spst-nc v-156-2c5 v-106-2c5 --- --- spst-no v-156-3c5 v-106-3c5 --- --- spdt 0.59n --- v-106-1c4 --- v-106-1c4-t spst-nc --- v-106-2c4 --- --- spst-no --- v-106-3c4 --- --- spdt spst-nc spst-no com nc no com nc $0. /0 refer to "micro switch common accessories" for separators (sold separately), actuators (sold separately) and terminal connectors (sold separately).
10 v miniature basic switch v contact specifications ratings note. the above rating values apply under the following test conditions. (1) ambient temperature: 20 2 c (2) ambient humidity: 65 5% rh (3) operating frequency: 30 operations/min approved standards ul (ul1054)/csa (csa c22.2 no.55) vde (en61058-1) consult your omron sales representative for specific models with vde approvals. testing conditions: 5e4 (50,000 operations), for models of v-21: t80 (0 to 80c), for models of v-16: t105 (0 to 105c) characteristics note. the data given above are initial values. *1. the dielectric strength shown in the tabl e indicates a value for models with a separator. *2. for the pin plunger models, the above values apply for use at the free position and total travel position. for the lever mod els, they apply at the total travel position. close or open circuit of the contact is shorter than 1 ms. *3. for testing conditions, consult your omron sales representative. item model v-21 v-16 v-15 v-10 contact specification rivet material silver alloy silver gap (standard value) 1 mm inrush current nc 50 a max. 40 a max. 30 a max. 24 a max. no minimum applicable load (reference value) dc5v 160ma model item rated voltage resistive load v-21 ac250v 21 a dc125v dc250v 0.6 a 0.3 a v-16 ac250v 16 a dc125v dc250v 0.6 a 0.3 a v-15 ac250v 15 a dc125v dc250v 0.6 a 0.3 a v-10 ac250v 10 a dc125v dc250v 0.6 a 0.3 a rated voltage model v-21 v-16 v-15 v-10 125 vac 250 vac 21a 1/2hp 16a 1/2hp 15a 1/2hp 10a 1/2hp 125 vdc 250 vdc 0.6a 0.3a rated voltage model v-21 v-16 ac250v 20(4)a 16(4)a item model v-10 v-15 v-16 v-21 permissible operating speed 0.1mm to 1 m/s max. (pin plunger models) permissible operating frequency mechanical 600 operations/min max. (pin plunger models) electrical 60 operations/min insulation resistance 100m min. (at 500 vdc with insulation tester) contact resistance (initial value) 15m max. dielectric strength *1 between terminals of the same polarity ac1,000v 50/60hz 1min between current-carrying metal parts and ground ac1,500v 50/60hz 1min ac1,500v 50/60hz 1min ac2,000v 50/60hz 1min between each terminals and non-current-carrying metal parts ac1,500v 50/60hz 1min ac1,500v 50/60hz 1min ac2,000v 50/60hz 1min vibration resistance *2 malfunction 10 to 55 hz, 1.5-mm double amplitude shock resistance *2 durability 1,000 m/s 2 {approx. 100 g} max. malfunction 200 m/s 2 {approx. 20g} max. 300 m/s 2 {approx. 30 g} max. durability *3 mechanical 50,000,000 operations min. (60 operations/min) electrical 300,000 operations min. (30 operations/min) heat resistive: 50,000 operations min (30 operations/min) 100,000 operations min. (30 operations/min) heat resistive: 20,000 operations min (30 operations/min) 100,000 operations min. (30 operations/min) degree of protection iec ip40 degree of protection against electric shock class i proof tracking index (pti) 175 ambient operating temperature -25 to 105 c (heat resistive: -25 to 150 c) -25 to 105 c -25 to 80 c (at ambient humidity of 60% max.) (with no icing or condensation) ambient operating humidity 85% max. (for 5 to 35 c) weight approx. 6.2g (pin plunger models)
11 v miniature basic switch v terminals and apperance (unit: mm) note. the above is for the spdt c ontact specifications. two termina ls will be available for spst-no or spst-nc contact specifica tions. for terminal positions, refer to contact form on page 9. mounting holes (unit: mm) solder terminals (a) quick-connect terminals (#187) (c2) quick-connect terminals (#250) (c) (5.5) (6.5) 2.9 t=0.5 three, solder terminals (10) (5.5) (6.5) 2.9 t=0.5 three, quick-connect terminals (#187) (10) (4.9) (7.7) 3.2 t=0.8 three, quick-connect terminals (#250) (12.0) 4.75 0.1 1.6 dia. 2.4 dia. 6.35 3.2 * * indicates the length to the center of the 1.6-dia. holes 4.75 0.1 1.6-dia. terminal hole 6.35 3.2 6.35 0.1 1.65-dia. terminal hole 8.1 3.95 10.3 0.1 two, 3.1-dia. mounting holes or m3 screw holes 22.2 0.1
12 v miniature basic switch v dimensions and operating characteristics the following illustrations and drawings are for quick-connect terminals #250 (terminals c). v models with a switching current of 16 a and 11 a incorporate solder terminals (a) and quick-connect termimals #18 7 (c2). these models are different from #250 models in terminal size only. dimensi ons of solder terminals (a) and quick- connect terminal #187 (c2) are omitted. please refer to the "terminals and shapes" on previous page. the @ is replaced with the code for the terminals. see the "l ist of models" for availabl e combinations of shapes. note 1. unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. note 2. the operating characteristics are for operation in the a direction ( ). thermoplastic case v-21/-16 models 19.1 39.8 0.8 22.2 0.1 20.2 0.25 3.4 0.15 (12.0) 27.8 2.8 3.1 +0.13 ?0.03 2.8 op pt 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 2.8 1.6 three, quick-connect terminals (#250) (t0.8) 10.3 2.84.2 a pin plunger v-21-1 @6 v-16-1 @6 v-16-1 @5 operating characteristics model v-21-1 @ 6 v-16-1 @ 6 v-16-1 @ 5 of max. rf min. 3.92n 0.78n 1.96n 0.49n pt max. ot min. md max. 1.2mm 1.0mm 0.4mm op 14.7 0.4mm short hinge lever v-211-1 @6 v-161-1 @6 v-161-1 @5 operating characteristics model v-211-1 @ 6 v-161-1 @ 6 v-161-1 @ 5 of max. rf min. 3.92n 0.49n 1.96n 0.49n pt max. ot min. md max. 1.6mm 0.8mm 0.6mm op 15.2 0.5mm 19.1 39.8 0.8 22.2 0.1 3.4 0.15 (12.0) 27.8 2.8 3.1 +0.13 ?0.03 2.8 op pt 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 1.6 three, quick-connect terminals (#250) (t0.8) 10.3 2.84.3 22.1 a 8.1 t=0.5 * * stainless-steel lever hinge lever v-212-1 @6 v-162-1 @6 v-162-1 @5 operating characteristics model v-212-1 @ 6 v-162-1 @ 6 v-162-1 @ 5 of max. rf min. 2.45n 0.25n 1.23n 0.14n pt max. ot min. md max. 4.0mm 1.6mm 1.5mm op 15.2 1.2mm 19.1 39.8 0.8 22.2 0.1 3.4 0.15 (12.0) 27.8 2.8 2.8 op pt 10.3 0.1 35.6 0.8 15.9 3.1 +0.13 hole ?0.03 1.6 three, quick-connect terminals (#250) (t0.8) 10.3 2.84.3 8.1 t=0.5 * a * stainless-steel lever 3.1 +0.13 ?0.03 long hinge lever models v-213-1 @6 v-163-1 @6 v-163-1 @5 operating characteristics model v-213-1 @ 6 v-163-1 @ 6 v-163-1 @ 5 of max. rf min. 1.27n 0.12n 0.69n 0.06n pt max. ot min. md max. 9.0mm 2.0mm 2.8mm op 15.2 mm + 2.6 ? 3.2 19.1 39.8 0.8 22.2 0.1 3.4 0.15 (12.0) 27.8 2.8 3.1 +0.13 ?0.03 2.8 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 1.6 10.3 2.8 4.3 t=0.5 * 59.4 0.8 op pt 8.1 a three, quick-connect terminals (#250) (t0.8) * stainless-steel lever
13 v miniature basic switch v note 1. unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. note 2. the operating characteristics are for operation in the a direction ( ). simulated roller lever v-214-1 @6 v-164-1 @6 v-164-1 @5 operating characteristics model v-214-1 @ 6 v-164-1 @ 6 v-164-1 @ 5 of max. rf min. 2.45n 0.25n 1.23n 0.14n pt max. ot min. md max. 4.0mm 1.6mm 1.5mm op 18.7 1.2mm 19.1 39.8 0.8 22.2 0.1 3.4 0.15 (12.0) 27.8 2.8 3.1 +0.13 ?0.03 2.8 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 1.6 10.3 2.8 4.3 t=0.5 * 8.1 three, quick-connect terminals (#250) (t0.8) * stainless-steel lever 32.6 0.8 r3.5 a op pt 19.1 39.8 0.8 22.2 0.1 3.4 0.15 (12.0) 27.8 2.8 3.1 +0.13 ?0.03 2.8 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 1.6 10.3 t=0.5 * 8.1 a op pt 20.1 5.1 4.84.8 *2 three, quick-connect terminals (#250) (t0.8) *1. stainless-steel lever *2. polyacetal resin roller short hinge roller lever v-215-1 @6 v-165-1 @6 v-165-1 @5 operating characteristics model v-215-1 @ 6 v-165-1 @ 6 v-165-1 @ 5 of max. rf min. 4.71n 0.49n 2.35n 0.49n pt max. ot min. md max. 1.6mm 0.8mm 0.6mm op 20.7 0.6mm 19.1 39.8 0.8 22.2 0.1 3.4 0.15 (12.0) 27.8 2.8 3.1 +0.13 ?0.03 2.8 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 1.6 10.3 t=0.5 * 8.1 three, quick-connect terminals (#250) (t0.8) *1. stainless-steel lever *2. polyacetal resin roller op pt 5.1 4.84.8 *2 34 0.8 a hinge roller lever v-216-1 @6 v-166-1 @6 v-166-1 @5 operating characteristics model v-216-1 @ 6 v-166-1 @ 6 v-166-1 @ 5 of max. rf min. 2.45n 0.25n 1.23n 0.14n pt max. ot min. md max. 4.0mm 1.6mm 1.5mm op 20.7 1.2mm
14 v miniature basic switch v the following dimensions and operating characteristics are for both "not specified: standard (105 c)" and "-t: heat-resistive (150 c)" models. the following illustrations and drawings are for solder terminals (terminal a). v models with a s witching current of 15a and 10 a have quick-connec t terminals #187 (c2). these models are different from solder terminal models in terminal size only. illustrations for quick-connect terminals # 187 (c2) are omitted. please refer to "terminals and shapes" on page 8. the @ is replaced with the code for the terminals.see the "l ist of models" for available combinations of shapes. note 1. unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. note 2. the operating characteristics are for operation in the a direction ( ). thermosetting case (v-15/v-10 models) applicab le to b oth standard (105c) and heat-resistiv e (150c) models 18.8 37.8 0.8 22.2 0.1 20.2 0.25 3.4 0.15 (10) 27.8 2.8 3.1 +0.13 ?0.03 2.8 op pt 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 2.8 10.3 2.8 4.2 a t=0.5 three, solder terminals pin plunger v-15-1 @6 v-15-1 @5 v-10-1 @5 v-10-1 @4 operating characteristics model v-15-1 @ 6 v-15-1 @ 5 v-10-1 @ 5 v-10-1 @ 4 of max. rf min. 3.92n 078n 1.96n 0.49n 0.98n 0.20n pt max. ot min. md max. 1.2mm 1.0mm 0.4mm op 14.7 0.4mm short hinge lever v-151-1 @6 v-151-1 @5 v-101-1 @5 v-101-1 @4 operating characteristics model v-151-1 @ 6 v-151-1 @ 5 v-101-1 @ 5 v-101-1 @ 4 of max. rf min. 3.92n 0.49n 1.96n 0.49n 0.98n 0.15n pt max. ot min. md max. 1.6mm 0.8mm 0.6mm op 15.2 0.5mm 18.8 37.8 0.8 22.2 0.1 3.4 0.15 (10) 27.8 2.8 3.1 +0.13 ?0.03 2.8 op pt 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 10.3 2.8 4.3 22.1 8.1 t=0.5 * a t=0.5 three, solder terminals * stainless-steel le v er hinge lever v-152-1 @6 v-152-1 @5 v-102-1 @5 v-102-1 @4 operating characteristics model v-152-1 @ 6 v-152-1 @ 5 v-102-1 @ 5 v-102-1 @ 4 of max. rf min. 2.45n 0.25n 1.23n 0.14n 0.59n 0.06n pt max. ot min. md max. 4.0mm 1.6mm 1.5mm op 15.2 1.2mm 35.6 0.8 t=0.5 * op pt 8.1 a 18.8 37.8 0.8 22.2 0.1 3.4 0.15 (10) 27.8 2.8 3.1 +0.13 ?0.03 2.8 10.3 0.1 15.9 3.1 +0.13 hole ?0.03 10.3 2.8 4.3 t=0.5 three, solder terminals * stainless-steel le v er long hinge lever models v-153-1 @6 v-153-1 @5 v-103-1 @5 v-103-1 @4 operating characteristics model v-153-1 @ 6 v-153-1 @ 5 v-103-1 @ 5 v-103-1 @ 4 of max. rf min. 1.27n 0.12n 0.69n 0.06n 0.34n - pt max. ot min. md max. 9.0mm 2.0mm 2.8mm 9.0mm 3.2mm 2.8mm op 15.2 mm 15.2 2.6 mm + 2.6 ? 3.2 59.4 0.8 t=0.5 * 3.1 +0.13 ?0.03 2.8 op pt 10.3 0.1 3.1 +0.13 hole ?0.03 8.1 a 18.8 37.8 0.8 22.2 0.1 3.4 0.15 (10) 27.8 2.8 15.9 10.3 2.8 4.3 t=0.5 three, solder terminals * stainless-steel le v er
15 v miniature basic switch v note 1. unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. note 2. the operating characteristics are for operation in the a direction ( ). precautions please read "common precautions" for correct use. soldering ? connecting to solder terminals complete the soldering at the iron tip temperature of 250 to 350 c (60w) within 5 seconds, and do not apply any external force for 1 minute after soldering. be sure to apply only the minimum required amount of flux.it may result in contact failure once the flux penetrates into the internal part of the switch. ? connecting to quick-connect terminals #187 insert the receptacle of quick-connect terminal #187 straight toward the terminal. applying excessive external force horizontally or vertically may cause deformation of terminals and may damage the housings. ? connecting to quick-connect terminals #250 insert the receptacle of quick-connect terminal #250 straight toward the terminal. applying excessive external force horizontally or vertically may cause deformation of terminals and may damage the housings. mounting use m3 mounting screw with plane washers or spring washers to securely mount the switch.tighten the screws to a torque of 0.39 to 0.59nm {4 to 6 kgfcm}. simulated roller lever v-154-1 @6 v-154-1 @5 v-104-1 @5 v-104-1 @4 operating characteristics model v-154-1 @ 6 v-154-1 @ 5 v-104-1 @ 5 v-104-1 @ 4 of max. rf min. 2.45n 0.25n 1.23n 0.14n 0.59n 0.06n pt max. ot min. md max. 4.0mm 1.6mm 1.5mm op 18.7 1.2mm 3.1 +0.13 ?0.03 2.8 10.3 0.1 3.1 +0.13 hole ?0.03 18.8 37.8 0.8 22.2 0.1 3.4 0.15 (10) 27.8 2.8 15.9 10.3 2.8 4.3 32.6 0.8 t=0.5 * r3.5 op pt 8.1 a t=0.5 three, solder terminals * stainless-steel le v er 3.1 +0.13 ?0.03 2.8 10.3 0.1 3.1 +0.13 hole ?0.03 18.8 37.8 0.8 22.2 0.1 3.4 0.15 10 27.8 2.8 15.9 10.3 5.1 op pt 20.1 a t=0.5 * 8.1 4.84.8 *2 t=0.5 three, solder terminals *1. stainless-steel le v er *2. polyacetal resin roller short hinge roller lever v-155-1 @6 v-155-1 @5 v-105-1 @5 v-105-1 @4 operating characteristics model v-155-1 @ 6 v-155-1 @ 5 v-105-1 @ 5 v-105-1 @ 4 of max. rf min. 4.71n 0.49n 2.35n 0.49n 1.18n 0.15n pt max. ot min. md max. 1.6mm 0.8mm 0.6mm op 20.7 0.6mm stainless steel roller for heat-resistive models 3.1 +0.13 ?0.03 2.8 10.3 0.1 3.1 +0.13 hole ?0.03 18.8 37.8 0.8 22.2 0.1 3.4 0.15 (10) 27.8 2.8 15.9 10.3 5.1 8.1 4.84.8 *2 34 0.8 op pt a t=0.5 *1 t=0.5 three, solder terminals *1. stainless-steel le v er *2. polyacetal resin roller hinge roller lever v-156-1 @6 v-156-1 @5 v-106-1 @5 v-106-1 @4 operating characteristics model v-156-1 @ 6 v-156-1 @ 5 v-106-1 @ 5 v-106-1 @ 4 of max. rf min. 2.45n 0.25n 1.23n 0.14n 0.59n 0.06n pt max. ot min. md max. 4.0mm 1.6mm 1.5mm op 20.7 1.2mm stainless steel roller for heat-resistive models precautions for safe use precautions for correct use
16 v miniature basic switch v ? application examples provided in this document are for reference only. in actual applications, confirm equipment functions and safety before using the product. ? consult your omron representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. cat. no. b010-e1-14 0615(0207)(o) note: do not use this document to operate the unit. omron corporation electronic and mechanical components company contact: www.omron.com/ecb

▲Up To Search▲

Price & Availability of V-10-1A5

	To Download V-10-1A5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .